Check items to add to the cart or select all
Product Description
A Full cover block for AMD/ATI Radeon HD 5870 Series refference PCB design.
Special water block was designed for hard enthusiast users to get the most out of newest AMD/ATI Radeon HD 5870 graphic card. The graphic card has extreme overclocking potential, which can be only achieved with the best cooling.
The crucial part are power reguator chips (VRC/mosfets), that are the source for extreme overclocking. Therefore EK developed full copper base to supply maximal cooling for all chips that needs to be cooled. Blocks design allows water to pass over voltage regulator chips as close as possible, thus supplying maximum cooling possible.
Top is made of quality acrylic glass. The sealing is preformed by quality rubber washer (o-ring). Block is mounted with enclosed M3x8mm and M3×10 screws. Standoffs for safe mounting are enclosed.
Mounting mechanism is enclosed with 2 plugs are enclosed!
Fittings can be used on both side of the block (up and down),
Special water block was designed for hard enthusiast users to get the most out of newest AMD/ATI Radeon HD 5870 graphic card. The graphic card has extreme overclocking potential, which can be only achieved with the best cooling.
The crucial part are power reguator chips (VRC/mosfets), that are the source for extreme overclocking. Therefore EK developed full copper base to supply maximal cooling for all chips that needs to be cooled. Blocks design allows water to pass over voltage regulator chips as close as possible, thus supplying maximum cooling possible.
Top is made of quality acrylic glass. The sealing is preformed by quality rubber washer (o-ring). Block is mounted with enclosed M3x8mm and M3×10 screws. Standoffs for safe mounting are enclosed.
Mounting mechanism is enclosed with 2 plugs are enclosed!
Fittings can be used on both side of the block (up and down),
Additional Information
| Option | Copper Plexi |
| Threads | G1/4 |
| Chip Manufacturer | AMD Radeon |
You may also be interested in the following product(s)
|
EK-12mm (1/2") G1/4 High-Flow Fitting
Incl. 20% VAT:
€ 1.99
|
EK-10mm (3/8") G1/4 High-Flow Fitting
Incl. 20% VAT:
€ 1.99
|
EK-DCP 2.2 (12V DC Pump)
Incl. 20% VAT:
€ 34.94
|
EK-DCP 4.0 (12V DC Pump)
Incl. 20% VAT:
€ 44.95
|
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
