Check items to add to the cart or select all
Product Description
EK-Cable Splitter 4-Fan PWM Extended is a 1-to-4 PWM fan splitter which allows the user to connect up to four PWM fans from just one PWM fan header on the motherboard. And because the fans are PWM controlled the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings, meaning the RPM and therefore noise will be reduced if the system does not demand high airflow.
The extra power required to run four fans from this splitter is provided by the 4-pin molex connector, which does need to be connected if more than one fan is used.
If you want your motherboard to control the cooling inside your computer then EK-Cable Splitter 4-Fan PWM Extended could be what you are looking for.
Features:
- Connect four PWM fans from one PWM fan header
- Molex connector for extra power
- Extra long fully sleeved cables (total lenght = 800mm +/- 10mm)
- Easy installation
Connector:
- 4x 4-Pin PWM Header (lenght ~ 400mm)
- 1x 4-Pin PWM Connector (lenght ~ 600mm)
- 1x 4-Pin Molex Connector (lenght ~ 300mm)
Made in China by Gelid Solutions for EKWB!
You may also be interested in the following product(s)
|
Basic Fan Controller
Incl. 20% VAT:
€ 2.50
|
Adapter 3-pin (12V) to 3-pin (7V) 20cm
Incl. 20% VAT:
€ 1.99
|
Adapter 3-way 5V/7V/12V
Incl. 20% VAT:
€ 3.49
|
Extension cable 3-pin Molex 30cm
Incl. 20% VAT:
€ 1.79
|
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
